1620A "DewK" Thermo-hygrometer
User's Guide
7.2.2
32
darkens the screen. The contrast may also be adjusted from the main screen by
using the ud buttons (see Section 5.1, Front Panel).
Figure 14 Display Setting
The lr buttons are used to select the parameter setting. The ud buttons are
used to scroll between each parameter. Press the Enter button to change and
save the new settings. Press the Exit button to cancel any changes and exit to
the menu.
Display Layout
The DISPLAY LAYOUT function allows you configure any of the 16 different
display layouts. These settings may be password-protected (see Section 7.5.4,
Password). A display layout can be enabled or disabled by choosing ON or
OFF. ON allows the display to be selected from the main screen using the lr
buttons. The number of zones is selectable from 1 to 4. Each zone can display
one of the following zone types: blank screen, time, stats, temperature and hu-
midity numerically, or temperature and humidity graphically. Once the number
of zones is selected, you can select what is to be displayed in each zone.
The lr buttons are used to select the parameter setting. The ud buttons are
used to move between each parameter. Press the Enter button to change and
save the new settings. Press the Exit button to cancel any changes and exit to
the menu.