Table of Contents
Advertisement
6.7
Display
The thermo-hygrometer display is originally configured with six default display
layouts enabled. The user can enable and configure any of the 16 display lay-
outs to show a variety of data in numerical or graphical format (see Section
7.2.2, Display Layout). Enabled display layouts can be quickly selected from
the main screen using the l and r buttons.
6.8
Alarm Screen
The Alarm Screen can be accessed from the main screen by pressing Exit or by
entering the Alarm Menu (see Section 7.4, Alarm Menu). If enabled, the alarm
screen will appear automatically when an alarm event occurs. When an alarm is
displayed the event can be either hidden by pressing Exit or cleared by pressing
Enter.
6.9
Measuring
The thermo-hygrometer will automatically make measurements on enabled
channels at the set period when a sensor is attached. Channels are enabled us-
ing the CHANNEL SETTING function in the CHANNEL menu (see Section
7.3.1.1, Record Setting). The measurement period is also set with this function.
6.10
Unit of Temperature
The thermo-hygrometer is capable of displaying temperature in Celsius (C) or
Fahrenheit (F). The unit of temperature applies to temperature measurements
on either channel that are displayed, recorded, or printed. Recorded data is
viewed or printed with the currently set unit of temperature. The unit of tem-
perature is set using the DISPLAY SETTING function in the DISPLAY menu
(see Section 7.2.1, Display Setting) or the SYSTEM SETTING function in the
SYSTEM menu (see Section 7.5.1, System Setting).
6.11
Recording Measurements
The thermo-hygrometer will automatically record measurements on enabled
channels at the set period. Recording is enabled using the RECORD SETTING
function in the DATA RECORD sub-menu in the DATA menu (see Section
7.3.1.1, Record Setting). The record period is also set with this function.
6.12
Sensors
The standard-accuracy sensor and high-accuracy sensor are used to measure
temperature and relative humidity. The sensors attach to the thermo-hygrometer
by plugging into the top or side panel of the instrument.
6 General Operation
Display
21
Advertisement
Table of Contents
