Getting Started; Initial Setup - Analog Devices AD9161 User Manual

AD9161/AD9162/AD9163/AD9164

GETTING STARTED

The software is included in the evaluation board DVD. The
installation includes an updated version of the DPGDownloader
software and the necessary files for all variants of the AD9161,
AD9162, AD9163, and AD9164
the schematic, board layout, data sheet, and SPI programmer.
Download the DPGDownloader software online from the
Software Suite.
Also install the ACE software to configure the device.
the software that is used to load the registers in the AD9161,
AD9162, AD9163, and AD9164. The
access to the AD9161, AD9162, AD9163, and
map, and has several views and features that simplify its use.
Many of the ACE software features are detailed in the ACE User
Guide section.
Download this software online from the
The ACE software package includes the required plugins for the
AD9161, AD9162, AD9163, and
User Guide
evaluation boards, including
DAC
ACE is
ACE software enables full
AD9164 register
ACE software page.
AD9164 evaluation board.

INITIAL SETUP

Complete the following initial steps to get started with the
evaluation of the device:
1. Install the DPGDownloader software on the PC. Analog
Devices, Inc. recommends verifying the basic setup before
making any modifications to the evaluation board.
2. Connect the PC to the evaluation board using the XP2
mini USB connector after installing the necessary software
packages.
3. Connect the PC to the
connector.
Several different configurations and scenarios are explained in
this user guide with step by step instructions. Choose the
configuration that meets the requirements. A summary of the
ACE user guide is provided in the ACE User Guide section.
Rev. 0 | Page 5 of 22
UG-1526
ADS7-V2EBZ using the USB