Table of Contents
Advertisement
The box in the bottom right corner of the Trend
display screen contains labels for the remaining
four Trend Monitor screens. By using the soft
key beneath the labels, the operator can select a
specific screen. Pressing the "ENTER" key ac-
tivates the selected screen.
The Trend Display screen can be configured by
the operator using the Set Up Trend screen.
Set Up Trend Screen
The Set Up Trend screen (Figure 28) allows the
operator to select measurements for the top and
bottom trend graphs, the time scale interval, the
Auto Scale feature, Data Erase function, and the
Trend Grid display.
SE T UP TRE ND
TOP
BP
CO2
SaO2
PULSE
AGENT
O2
MINVOL
RR
BR PR
TEMP 1
TEMP 2
ENTER
Figure 28
Set Up Trend Screen
RETURN TO CD-ROM TABLE OF CONTENTS
MONITORING SYSTEM (continued)
To select a specific configuration, the operator
must:
1. Press the soft key beneath the
corresponding column. The cursor will move
to the top selection of the column.
2. Continue pressing the soft key until the
cursor moves to the desired configuration.
3. Press the "ENTER" key to enable the
selected configuration. The cursor will
automatically return to the "EXIT" screen
label.
The operator can press the "ENTER" key again
to exit the Set Up Trend Screen, or else continue
configuration via the soft keys.
BOTTOM
SCALE
10 MIN
B P
CO2
30 MIN
SaO2
1 HR
PULSE
2 HR
AGENT
4 HR
O2
8 HR
MINVOL
RR
AUTO
BR PR
SCALE
TEMP 1
ON
TEMP 2
OF F
DA TA
ERASE
GRID
ON
OFF
EXIT
OP30029
47
Advertisement
Table of Contents
