Set Hsync/De Function - DAQ system PCIe-FRM24 C User Manual

5-7 Set Hsync/DE Function

If there is an abnormality in resolution due to an error in Hsync or DE (Data Valid) during the
input signal of the camera, there is a problem in the image if there is an error in the resolution.
To solve this, Hsync and DE detect the rising edge and forcefully set the desired resolution.
(1) "Set Hsync/DE"
Enter "Hsync, DE" value
(2) "Enable"
Function application
(3) "Hsync, DE"
User resolution input
PCIE-FRM24_C User's Manual
43