Image Option Function - DAQ system PCIe-FRM24 C User Manual

5-2 Image Option Function

(1) "Get Size"
It gets the input image resolution of sensor.
(2) "Bytes"
Select the size of the data width. "1" is 1tap (8bit), "2" is 2Tap (16bit), "4" is 4Tap (32bit),
"8" is 8Tap (64bit), and "10" is 10Tap (80bit).
Data is transmitted in 64-bit increments from Frame Grabber.
1tap Data structure: 64Bit (8Bit + 8Bit + 8Bit + 8Bit + 8Bit + 8Bit + 8Bit + 8Bit)
 Transmits 8 Clock Pixels at once
2tap Data structure: 64Bit (16Bit + 16Bit + 16Bit + 16Bit)
Transmits 4 Clock Pixels at once
4tap Data structure: 64Bit (32Bit + 32Bit)
Transmit 2 Clock Pixels at once
8tap Data structure: 64Bit (64bit)
Transmit 1 Clock Pixel at a time
10tap Data structure: 64Bit x 4
80-bit first-in, first-out, 64-bit output
(4Pixel_64bit) + (4Pixel_16bit+ 3Pixel_48bit) + (3Pixel_32bit + 2Pixel_32bit) + (2Pixel_48bit
+ 1Pixel_16bit) + (1Pixel_64bit)
(3) "5'th Skip"
When this button is selected, it goes beyond the 5th byte from the image data.
(4) "3'th Skip"
When this button is selected, it goes beyond the 3th byte from the image data.
(5) Mode Selection
"DDR En" toggle: Select whether to use DDR Memory.
"Hsync Inv" toggle: Horizontal Inverts the phase of the signal.
"Half tone" toggle: Select Half tone mode.
"DVAL use" toggle: Both DVAL and LVAL are applied as DVAL input signals.
"LVAL use" toggle : Both DVAL and LVAL are applied as LVAL input signals..
"Vsync Inv" toggle: Inverts the phase of the vertical signal.
"RB Swap": Change the color of the image. (Red <-> Blue)
PCIE-FRM24_C User's Manual
33