DAQ system PCIe-FRM24 C User Manual page 33

(8) "Save Data"
Press this button, the image begins to save in binary form to the PC.
(9) "Close Device"
Press this button to finish usage of the board and terminate the program.
(10) "Video Data Bits"
You can select 8Bit, 16Bit YUV, 24Bit BGR, 8Bit Bayer, 10bit bayer.
(11) "Bayer Mode"
"RGGB, BGGR, GRBG, GBRG": If the above selection is Bayer, select Red, Green Blue pixel
order.
(12) "Display Mode"
"Full/Top Left/Top Right/Bot. Left/Bot. Right" : It shows the video of 800x600 resolution
(13) "Save Compare"
"Compare" : Shows the number of false-bytes that compare between the saved file and
the original file.
"Save On Error": Save the error.
(14) "Auto Save"
When check this box, it save a file by BMP or JPEG format each 30 frames per 1 second until
un-check this box.
(15) "Select Folder"
It selects a folder for saving. It set "D:\Image" folder basically.
"Save Count" : Shows the number of saved frames.
PCIE-FRM24_C User's Manual
where you wish selected parts.
32