J1 Connector; J2 Switch - DAQ system PCIe-FRM24 C User Manual

3-3-1 J1 Connector

J1 is a JTAG (Joint Test Action Group) connector and is used to update the FPGA program
on the board. Do not use when operating the board normally.

3-3-2 J2 Switch

PCIE-FRM24_C board is designed to use up to 4 PCIe-FRM24_C boards simultaneously in
one system (PC). Each board classification can be set through the 4-pin DIP switch in the
board.
[Table 1. J2 Switch]
1 2
OFF OFF
ON OFF
OFF ON
ON ON
ON
OFF
1 2
[Figure 3-3. J2 Switch]
Description
Board No. 0
Board No. 1
Board No. 2
Board No. 3
PCIE-FRM24_C User's Manual
17