April 2023
1.3
Required tooling
Separate tooling for Strap option
Tooling is supplied in the IK220 installation kit.
•
Tin snips (used to cut the fixing strap to the correct length)
•
Flathead screwdriver or wrench and socket (to tighten the fixing
strap)
•
2.5 mm hex key (for power module retaining bolts)
Tooling required for magnetic fixture
•
Torque wrench with 13mm A/F deep socket
•
13mm A/F spanner
•
6mm A/F hex key
•
2.5mm hex key (for the power module retaining bolts)
1.4
Alternative installation options
Optional tooling
If preferred, an electric screwdriver or wrench may be used instead
of the supplied tools to decrease installation time. This is not
included in IK220 installation kit
Quick Start Guide
Quick Start Guide
7