Advertisement
Quick Start Guide
6.10 International
6.10.1 I7 IECEx Instrinsic Safety
Certificate:
Standards:
Markings:
Warning:
Special conditions for Safe Use (X):
1. Parts of the mounting foot contain titanium or a titanium alloy.
Care must be taken to ensure that the equipment is suitable
for the intended mounting location and must be protected
against the risk of impact or frictional ignition.
2. The capacitance of the mounting foot will exceed 3pF if the
foot is not bonded to earth; this must be taken into account
during installation.
3. Plastic on the base of the mounting foot may present a
potential electrostatic ignition risk and must not be rubbed or
cleaned with a dry cloth.
4. The equipment may be attached to process pipework at a
temperature of up to 300 °C as follows:
44
IECEx BAS 17.0048X
IEC 60079-0: 2017 Edition 7.0, IEC 60079-11: 2011
Edition 6.0
Ex ia IIC T4...T1 Ga, T
Potential Electrostatic Charging Hazard
Use only with approved power source
See instructions
a. –50 °C ≤ Ta ≤ +120 °C for T4
b. –50 °C ≤ Ta ≤ +190 °C for T3
c. –50 °C ≤ Ta ≤ +290 °C for T2
d. –50°C ≤ Ta ≤ +300 °C for T1
= –50 °C to +75 °C, IP67
amb
Emerson.com/Rosemount
April 2023
Advertisement
