Emerson Rosemount Wireless ET410 Quick Start Manual page 31

April 2023
Figure 4-8: Sensor placement into magnetic fixture
NOTICE
The magnets used in the sensors have a high pull force. To
avoid damage and to get the precise location for each sensor,
initially place the senor at an angle to the vessel and then
gently lower onto the surface, as displayed in
Figure 4-9: Sensor placement into vessel
7. Ensure that the sensor is perpendicular to and in contact with
the vessel, as displayed in the
Quick Start Guide
A. ET410 with brackets
B. Magnetic fixture
A. Place sensor at an angle to the vessel
B. Lower sensor onto the vessel
Figure
Figure 4-10.
Quick Start Guide
4-9.
31