Emerson Rosemount Wireless ET410 Quick Start Manual page 32

Quick Start Guide
Figure 4-10: ET410 in contact with vessel inside magnetic
fixture
8. Fit the 4 sensor securing bolts, gridlock washers, and nuts
from magnetic fixture as shown in the
Figure 4-11: ET410 fitted and secured in magnetic fixture
Note
One nord-lock washer is placed under the bolt head and the
other is placed under the nut. Torque to 14Nm with the torque
wrench and allen key provided.
9. Download another waveform and check if the waveform
quality is good before proceeding. If necessary, move
the magnetic fixture using the instructions in Removal or
repositioning magnetic fixture, and then continue checking
the waveform quality.
32
April 2023
Figure 4-11.
Emerson.com/Rosemount