Advertisement
April 2023
Figure 5-1: Magnetic unit adjustment
5.3
Removal or repositioning of the magnetic fixture
Prerequisites
•
Ensure you have the 4 protective caps for the magnetic fixture
and the protective cap for the sensor.
•
One person needs to hold the sensor in position while the other
follows the procedure.
Procedure
1. Remove the 4-sensor securing bolts, washers and nuts as
displayed in
the sensor and set it aside.
Quick Start Guide
A. Magnetic unit before adjustment
B. Magnetic unit after adjustment
Figure
5-2, then place the protective cap back on
Quick Start Guide
37
Advertisement
