Table of Contents
Advertisement
Technical Specifications
EVR
Maximum fluid working pressure ‡
Maximum fluid temperature
Fluid circulation ports
Line voltage rating
Wetted parts
Weight
Voltage
Fluid inlet pressure at inlet fitting
Pump Inlet
Fluid Inlets
Component A
Component B
Fluid Outlets on Manifolds
Component A
Component B
NOTES
‡ The maximum fluid working pressure for the base machine without hoses is 3500 psi (24.1 MPa,
241 bar). If hoses, valves or accessories rated at less than 3500 psi are installed, the system maximum
fluid working pressure becomes the rating of the hoses. The minimum pressure rating for hoses is
2000 psi. Do not install hoses with a pressure rating lower than 2000 psi.
All other brand names or marks are used for identification purposes and are trademarks of their
respective owners.
California Proposition 65
CALIFORNIA RESIDENTS
WARNING: Cancer and reproductive harm – www.P65warnings.ca.gov.
3A8565C
US
3500 psi
120°F
1/4 NPS(m)
200-240V, 1ph, 40A, 50/60 Hz
Stainless steel, zinc-plated carbon steel, brass, tungsten
carbide, chrome, fluoroelastomer, PTFE, ultra-high molec-
ular weight polyethylene, silicon nitride
425 lbs
240V
70 - 2000 psi
Technical Specifications
Metric
24 MPa, 241 bar
50°C
193 kg
0.48 - 13.8 MPa, 4.8 - 138
bar
3/4 npt(f)
3/4 npt(f)
1/2 npt(f)
1/2 npt(f)
73
Advertisement
Table of Contents
