Graco EVR Instructions Manual page 51

Tag ID Description
23 Gateway Recipe Shot Size
(XXXX.XX cc)
24 Gateway Recipe Type (0 =
Shot, 1 = operator)
25 Desired Data Exchange Ele-
26 Desired Data Exchange Ele-
ment Value
NOTES:
* If set, control of the EVR from the ADM will be disabled.
When in operator mode for recipe, the bit must be held high, if dropped low the operator mode will be completed,
dispensing will stop and the dispense will be recorded into the shot log.
When in the shot (cc mode) for recipe, a toggle of the button to start the dispense is needed. The shot can be can-
celed at any time by using the Stop Recipe Request
The data outlined in red is required to create a recipe.
3A8565C
EVR Fieldbus Map 19C930
Automation Outputs (signal from PLC to EVR)
Data Type
ment
Minimum
Value
uint16 0
uint16 0
uint16 0
sint32 See the data exchange for
Min and Max Values
Maximum
Value Bit
327.68 0-14
3 0-14
32,767 0-14
0-31
I/O Integration
Byte
14-15
16-17
18-19
20-24
51