Graco EVR Instructions Manual page 34

ADM Screen Overview
Gel Timer: If enabled, the gel timer's amount of time
remaining before the next gel shot will be displayed
under . To start the gel timer, the system must
be active and a recipe must have been dispensed. If a
feature (Park, Depressurization, Purge, Base Purge, or
Recirculation) is triggered or the system is inactive, the
gel timer will be stopped and the process will need to
be repeated in order to start the gel timer countdown
again. If a recipe is dispensed while the gel timer is
counting down, then the gel timer will reset and the
count down will restart after the recipe is completed.
Tank Stand Status Information
NOTE: The tank stand information and icons will only
be shown when the tank stand is connected to the EVR
network.
Tank Status Fill Levels: These icons display the fill
level of each of the tanks.
Tank Refill: Press
refill. If a tank is filling, pressing either button will abort
the filling operation.
34
or to initiate a tank
Recirculation: When pressed, the recirculation icon
will recirculate the material through the pumps.
To stop the material from recirculating through the
pumps, press the recirculation icon again.
3A8565C