Wheel Lock Operation - Otto Bock KIWI Instructions For Use Manual

6.3 Wheel Lock Operation (Fig. 32/33)
NOTICE
Risk of damage due to incorrect wheel lock operation� If the wheel lock operating lever is not actu-
ated sufficiently, it can happen that the brake block rubs against the brake collar resulting in excessive
wear. Always press the wheel lock lever by 90° (up to the stop) to ensure that the wheel lock can
fully engage and achieve maximum braking effect.
If the wheel lock lever is not fully reset to its initial position for releasing the brake, it can happen that
the brake block rubs against the brake collar resulting in excessive wear. Always fully release the
wheel lock�
Always engage the wheel lock before taking out the child and when parking the rehab buggy on
uneven ground. Pull the wheel lock lever down until it is perpendicular to the push bar (Fig. 32),
the Bowden cable is tight and the wheels blocked.
To release the wheel lock, press the lateral button on the wheel lock lever and simultaneously
pull the lever up until it is parallel to the push unit (Fig. 33).
INFORmATION
If it is not possible to bring the wheel lock lever in the position perpendicular to the push bar at first
go, slightly push the buggy back and forth to allow the brake blocks to find the correct positions in the
brake dics.
30
32
31
33
43