Step 11
(Infeed Housing Assembly)
Loosen bolts and remove both access panels. Using a lifting strap, lift and slide the infeed housing over the
st
bottom flighting on the 1
tube. Secure the infeed housing to the first tube using (6) 1/2" x 1-1/2" flange bolts
and nuts in the top 6 holes. (See Fig. 11.3) Secure the bottom of the infeed housing to the tube by using 2
U-Bolts (11022) and (4) 1/2" flange nuts as shown in Fig. 11.4.
Fig. 11.1
Fig. 11.2
Fig. 11.3
Fig. 11.4
Harvest International H13XX Assembly Manual
Page 9 of 35