Step 3; Tube & Flighting Assembly - HARVEST H1362 Assembly Manual

Step 2
(Tube & Flighting Assembly)
Place tubes on assembly stands as shown. Place stands 12" or less from the end of the tube. Placing stands
further than 12" from end of the tube may cause damage to the tubes.

Step 3

Slide the flighting together from the 1
lock nuts. Align flighting as shown to make continuous. After connecting the flighting, slide the 1
together connecting with (10) 1/2" x 1-1/2" flange bolts & nuts.
Step 4
rd
Next, place the 3 tube on stands and connect the flighting to the 2
(3) 5/8" x 3" hex bolts & top lock nuts. After connecting the flighting, slide the 2
connect the tubes in the top & bottom 2 holes using (4) 1/2" x 1-1/2" flange bolts & nuts. Next place 2 cable
truss mount brackets (10680) on the left & right side of the 2
(6) 1/2" x 1-1/2" flange bolts & nuts. Next, attach a 3/8'' quick link to each bracket as shown in fig. 4.1.
(If assembling an H1362 skip to Step 7)
Harvest International H13XX Assembly Manual
Fig. 2.1
st nd
& 2 tube. Connect the flighting using (3) 5/8" x 3" hex bolts and top
Fig. 3.1
nd
Fig. 4.1
nd
tube flighting. Connect the flighting using
nd
& 3
tube flange and fasten tube & brackets using
st nd
& 2 tube
rd
tube together &
Page 5 of 35