HARVEST H1362 Assembly Manual page 14

Step 19
Next the hopper winch will be mounted. On the side of the infeed housing bolt the winch mount bracket on
using (4) 3/8" x 1" hex flange bolts & flange nuts. (See Fig. 20.1) Next attach the winch bracket to winch using
(3) 3/8" x 1" carriage bolts & flange nuts as shown in fig. 20.2. Tighten bolts by hand only for now. Slide the
winch handle onto winch with spring & nut. Tighten nut to secure handle. Place winch on top of winch mount
bracket and secure with a 1/2" bent pin. Angle the winch so it is centered with the top bracket (hopper arm
st
bracket) on the 1 tube as shown in figure 20.3. Tighten the (3) 3/8" x 1" carriage bolts.
Fig. 19.1 Fig. 19.2
Fig. 19.3
Harvest International H13XX Assembly Manual Page 14 of 35