1. Manuals
  2. Brands
  3. HARVEST Manuals
  4. Farm Equipment
  5. H13114XT
  6. Operator's manual

HARVEST H13114XT Operator's Manual

Grain auger
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
H13114XT Grain Auger Operator's Manual
Read this manual before using product. Failure to follow
instructions and safety precautions can result in serious injury,
death, or property damage. Keep manual for future reference.

Advertisement

Table of Contents
loading

Related Manuals for HARVEST H13114XT

Summary of Contents for HARVEST H13114XT

  • Page 1 H13114XT Grain Auger Operator's Manual Read this manual before using product. Failure to follow instructions and safety precautions can result in serious injury, death, or property damage. Keep manual for future reference.
  • Page 2 At 50-60 miles, check these a second time. For the H1364XT, H1374XT, and H1384XT, the maximum transport speed is 45 mph. For the H1394XT, H13104XT, and H13114XT, the maximum transport speed is mph.
  • Page 3 Harvest thanks you for your purchase of the best quality auger on the market. We are proud to have you on our team. Our equipment is manufactured in Canada and is made to improve your farming operation. Before you operate this auger, we advise that you read this manual and familiarize yourself with each of the features.

  • Page 4: Table Of Contents

    4.6 Completion & Cleanup 4.7 Lowering the Auger 5. Hydraulics 5.1 General Information 5.2 Cylinder Hydraulics 6. Storage & Maintenance 6.1 General Maintenance 6.2 Storage of Auger 7. Appendix & Forms H13114XT Parts Book H13XX Lubrication Requirements Warranty Policy & Forms...

  • Page 5: Introduction

    Keep this manual handy for frequent reference and to pass on to new operators or owners. Call your Harvest distributor or dealer if you need assistance, information, or additional copies of the manual. Always give your dealer the serial number of your Harvest Grain Auger when ordering parts or requesting service or information.

  • Page 6: Safety First

    2. Safety First Safety is a priority in your everyday work habit, especially if you work with machinery. Whether you are an owner, an operator, or an employee, it is your responsibility to know the operational requirements and safety precautions of the machinery. Why is safety important to you? 1.

  • Page 7: Transportation & Placement

    Failure to do this could cause damage to the auger, and serious injury or death. All Harvest augers have minimum clearance positions when in transport mode. Place auger in full down position. DANGER: Electrocution Hazard! Make sure that all unauthorized personnel are clear from the transport zone.

  • Page 8: Transport Procedure

    3.2 Transportation Procedure Move auger with a tractor only. Never attempt to move by hand. Under no condition should you allow riders on the auger or tractor. Transport the auger no faster than 15 mph. When roads are rough or surfaces are uneven, slow down to ensure safe travel.
  • Page 9 DANGER: If ground is very uneven, auger can tip and cause damage to the equipment and personal injury or death. WARNING: Never position raisers of any kind under the wheels of the auger to increase height. This includes pieces of wood, cement blocks, bricks, etc.

  • Page 10: Final Placement

    3.4 Final Placement of Auger When you are ready to use your auger, place the auger in its lowered position, and slowly back it up to your bin or storage facility, keeping an eye out for any people or obstructions in the hazard zone. DANGER: Avoid any electrical wires and overhead obstructions.

  • Page 11: Operation

    4. Operation Wear protective gear at all times when operating auger, such as hard hats, protective shoes, eye protection, and gloves. Do not wear loose clothing, and be sure that hair is tied back. 4.1 Pre-Operation Checklist Before operating the auger, the operator must follow this checklist: All safety shields are in place, secure, and in good working order.

  • Page 12: Start Up & Break In

    4.3 Start Up & Break In DANGER: Electrocution Hazard! Make sure that all unauthorized personnel are clear from the operation zone. This auger is not insulated. Be alert to overhead obstructions and electrical wires. Electrocution can occur without direct contact. Do not raise or lower auger until hazardous area is cleared.

  • Page 13: Everyday Operation

    4.4 Everyday Operation WARNING: When auger is in operation, keep your hands, clothing, and other objects away from intake hopper, drive chains, and all other parts of auger to avoid personal injury. For normal auger operations, the following procedure and safety precautions are strongly recommended: Complete the pre-operation checklist before using your auger.

  • Page 14: Completion & Cleanup

    4.6 Completion and Cleanup At completion of operation, the auger needs to be moved into storage position. Make sure that the entire work area is clean, remove all supports and wheel chocks, move auger out of working position, and fully lower the auger (see lowering procedure below). The proper steps for clean out of the auger are as follows: 1.

  • Page 15: Hydraulics

    Escaping hydraulic fluid can be nearly invisible under high pressure. Use some type of backdrop when searching for leaks. Harvest augers have a velocity fuse for hydraulic safety. If the hydraulic line breaks, it locks the system. Our shut off valve is equipped with a flow restrictive orifice.

  • Page 16: Cylinder Hydraulics

    5.2 Cylinder Hydraulics The testing done on Harvest auger hydraulics was done using a pressure gauge with 3000psi maximum rating. This was used simply as a guide. The psi requirements for an individual auger may vary slightly. Auger Size H1064XT 10” x 64’ 1300 H1074XT 10”...

  • Page 17: Storage & Maintenance

    Always replace damaged or worn parts before using the auger. Use only replacement parts manufactured by Harvest. Use of unauthorized parts will void the warranty of your auger. Contact your Harvest dealer to order parts. Harvest augers are designed and tested for a safe, efficient operation. Do not modify the equipment in any way.

  • Page 18: Storage Of Auger

    Tire Pressure: Check tire pressure monthly. The recommended tire pressure should be maintained at 40 to 45 psi. PTO Driveline: Lubricate both universal joints after every eight hours of operation. Lubricate the center portion of the driveline on a yearly basis. The first lube maintenance should be done in the first 16 to 24 hours of operation.

  • Page 19: Appendix & Forms

    PART/ASSEMBLY DESCRIPTION MODEL(S) H13114XT AUGER, BASE MODEL, H13114XT DESCRIPTION ITEM NO. PART NO. CABLE, TRUSS, LONG, 1/2" X 96FT 11955 CABLE, TRUSS, 1/2" X 60FT, H1374XT 11957 CABLE, TRUSS, 1/2" X 50FT, H1364XT 12007 CABLE, TRUSS, 3/8" X 51FT, H1064XT, H13XT...
  • Page 20 AUGER MODEL(S) PART/ASSEMBLY NO. PART/ASSEMBLY DESCRIPTION H1362, H1372, H1382 HOPPER ASSEMBLY PART NOT SHOWN: QTY: (1) NO. 10571A #50 ROLLER CHAIN X 80 ROLLERS + CONNECTOR LINK replaced by part P/N 30883 Detail B DRAWING NO. PBH13014...
  • Page 21 AUGER MODEL(S) PART/ASSEMBLY NO. PART/ASSEMBLY DESCRIPTION HOPPER ASSEMBLY H1362, H1372, H1382 30554 1 1-4 3 BOLT 1.25" 3 BOLT FLANGETEE WITH BEARING, STANDARD HOLE PATTERN 30442 SWING HOPPER WELDMENT, H13XX 10041 PLATE, BEARING MOUNT, SWING HOPPER 10516A GUARD, SWING HOPPER DRIVE CHAIN 10308 PIN, COTTER, 3/16x1.5"...
  • Page 22 PART/ASSEMBLY DESCRIPTION AUGER MODEL(S) H13102, & H13112 TUBE ASM, 5TH SECTION, H13102 & H13112 DETAIL A DETAIL B DESCRIPTION ITEM NO. PART NO. CLAMP, CABLE, 1/2" ZINC PLATED 10367 QUICKLINK CHAIN CONNECTOR, 1/2 INCH 10579 TRUSS, CABLE, MEDIUM, H1392 & 102 11807 TRUSS, CROSS, MEDIUM, H1392 &...
  • Page 23 PART/ASSEMBLY DESCRIPTION AUGER MODEL(S) H1392 & H13112 TUBE ASM, DISCHARGE, H1392 & H13112 DETAIL A DESCRIPTION ITEM NO. PART NO. CLAMP, CABLE, 1/2" ZINC PLATED 10367 NUT, 1/2-20, 60 DEGREE LUG NUT, ZINC 10434 QUICKLINK CHAIN CONNECTOR, 1/2 INCH 10579 TRUSS, CABLE, SMALL, H1392 &...
  • Page 24 PART/ASSEMBLY DESCRIPTION MODEL(S) H1392, H13102, & H13112 TUBE ASM, 3RD SECTION, 10FT TUBE DETAIL A DETAIL B DRAWING NO. DETAIL C PBH13037...
  • Page 25 PART/ASSEMBLY DESCRIPTION MODEL(S) H1392, H13102, & H13112 TUBE ASM, 3RD SECTION, 10FT TUBE DESCRIPTION ITEM NO. PART NO. CLAMP, 3/8" CABLE, ZINC 10303 CLAMP, CABLE, 1/2" ZINC PLATED 10367 COVER PLATE, CLEAN OUT 10528 5/8", OD CLAMP, GALV. VINYL, HYD HOSE RETAIN 10588A TRUSS, CROSS, MEDIUM, H1392 &...
  • Page 26 PART/ASSEMBLY DESCRIPTION MODEL(S) H1392, H13102, & H13112 TUBE ASM, 2ND SECTION DESCRIPTION ITEM NO. PART NO. CLAMP, CABLE, 1/2" ZINC PLATED 10367 5/8", OD CLAMP, GALV. VINYL, HYD HOSE RETAIN 10588A TRUSS, CABLE, MEDIUM, H1392 & 102 11807 TRUSS, CROSS, MEDIUM, H1392 & 102 11808 FLIGHTING SECTION ASM, REGULAR, H13XX 30430...
  • Page 27 PART/ASSEMBLY DESCRIPTION AUGER MODEL(S) H1392, H13102, & H13112 TUBE ASM, 4TH SECTION DETAIL B DETAIL A DESCRIPTION ITEM NO. PART NO. QUICKLINK CHAIN CONNECTOR, 1/2 INCH 10579 BRACKET, BOLT TRUSS CABLE MOUNT, H13XX 10680 FLIGHTING SECTION ASM, REGULAR, H13XX 30430 TUBE ASSEMBLY, 4TH FROM INFEED, H13112 31074 BOLT, 1/2-13UNC X 1-1/2"...
  • Page 28 PART/ASSEMBLY DESCRIPTION MODEL(S) H1392, H13102, & H13112 CARRIAGE ASM, H1392, H13102, & H13112 DETAIL B DETAIL A DETAIL C DRAWING NO. PBH13043...
  • Page 29 PART/ASSEMBLY DESCRIPTION MODEL(S) H1392, H13102, & H13112 CARRIAGE ASM, H1392, H13102, & H13112 DETAIL D DETAIL E DETAIL F DRAWING NO. PBH13043...
  • Page 30 PART/ASSEMBLY DESCRIPTION MODEL(S) DESCRIPTION ITEM NO. PART NO. ZERK, GREASE, 1/4-28UNF, STRAIGHT 10245 SCREW, SELF TAPPING, #12 x 3/4" 10304 PIN, ROLL, 3/8" X 3", ZINC 10384 NUT, 1/2-20, 60 DEGREE LUG NUT, ZINC 10434 5/8", OD CLAMP, GALV. VINYL, HYD HOSE RETAIN 10588A ELBOW, #8 FEMALE JIC TO #8 MALE JIC (6500-08-08) 11018...
  • Page 31 PART/ASSEMBLY DESCRIPTION MODEL(S) H1364XT - H13114XT INFEED ASM, H13XT DRAWING NO. PBXT13010...
  • Page 32 PART/ASSEMBLY DESCRIPTION MODEL(S) H1364XT - H13114XT INFEED ASM, H13XT DETAIL A DRAWING NO. PBXT13010...
  • Page 33 PART/ASSEMBLY DESCRIPTION MODEL(S) DESCRIPTION ITEM NO. PART NO. BRACKET, WINCH MOUNT, BOLT ON 10131B 1/2" CLAMP, GALV,VINYL,HYDRAULIC HOSE RETAIN 10151 SPROCKET, IDLER, #60, 11 TOOTH, 1/2" BORE 10300 KEY, 1/4" X 1-1/2" 10309 1/2 NPT MALE TIP, 1/2" BODYSIZE (8010-4) (PIONEER) 10324 BRACKET, PTO SHAFT SUPPORT, H13 10526A...
  • Page 34 PART/ASSEMBLY DESCRIPTION MODEL(S) H1364XT - H13114XT SWING TUBE ASM, H13XT DETAIL B DRAWING NO. DETAIL A PBXT13011...
  • Page 35 PART/ASSEMBLY DESCRIPTION MODEL(S) H1364XT - H13114XT SWING TUBE ASM, H13XT DESCRIPTION ITEM NO. PART NO. LYNCH PIN, 1/4" X 2-1/8" 10364 LID, ACCESS, HOPPER, H13XT 10500 PLATE, SWING TUBE RETAIN, H13XX 11790 HINGE, RUBBER, SWING TUBE, H13XT 13218 STRAP, RUBBER HINGE, SWING TUBE, H13XT...
  • Page 36 PART/ASSEMBLY DESCRIPTION MODEL(S) H1392, H13102, & H13112 TUBE ASM, 1ST SECTION DETAIL A DETAIL B DETAIL C DRAWING NO. PBXT13013...
  • Page 37 PART/ASSEMBLY DESCRIPTION MODEL(S) H1392, H13102, & H13112 TUBE ASM, 1ST SECTION DESCRIPTION ITEM NO. PART NO. HAIRPIN, .093 X 1.625 10381 PIN, COTTER, .125"x1.5" 10426 5/8", OD CLAMP, GALV. VINYL, HYD HOSE RETAIN 10588A I-BOLT, FORGED 3/4" RIGHT HAND 10652 BRACKET, HOPPER TRANSPORT ARM MNT.

  • Page 38: H13Xx Lubrication Requirements

    H13XX Lubrication Requirements Infeed Housing Lube Knuckle w/Multi Lith Grease Every 50 Hrs of Operation Fill Gearbox with 80/90 Gearlube Oil to Bottom of Plug Hole Check Seasonally Lube Chain w/Quality Chain Lube. Every 50 Hrs of Operation Lube Bearings w/Multi Lith Grease Every 50 Hrs of Operation Swing Tube Fill Gearbox with 80/90...
  • Page 39 Swing Hopper Lube Knuckle w/Multi Lith Grease Every 50 Hrs of Operation Lube Knuckle w/Multi Lith Grease Every 50 Hrs of Operation Lube Hopper Tires w/Multi Lith Grease Check Seasonally Lube Chain w/Quality Chain Lube. Every 50 Hrs of Operation Discharge Head Lube Hub w/Wheel Bearing Grease...
  • Page 40 Carriage Assembly Lube Cyl. Pins w/Multi Lith Grease. Check Seasonally Lube Hub w/Quality Wheel Bearing Grease. Check Seasonally Lube Pivot Points w/Mulit Lith Grease. Check Seasonally...
  • Page 42 Dealer WO (Must be attached): _____________________ Parts Required for Repair: FOR OFFICE USE ONLY Harvest Part # Invoice # (if known) Parts Freight Labor Misc Total Claim Manager Approval: ___________________________________ Date Approved: _____________________________________ ***All claims subject to Harvest approval. Please review our warranty policy before submitting.
  • Page 43 2902 Expansion Blvd. Storm Lake, Iowa 50588 PHONE: 712-213-5100 TOLL FREE: 1-800-667-5904 EMAIL: info@harvestauger.com WEB: www.harvestauger.com...

  • Page 44: Warranty Policy & Forms

    Postal Code: Home/Cell Phone #: E-mail: Date of Purchase: Dealer Name: Dealer Address: Model: Serial #: * Copy of original purchase invoice must be on record with Harvest or any future claims to be validated. 
 Warranty policy updated Aug. 2015...

Table of Contents