HARVEST H1362 Assembly Manual page 32

Step 47
Lift the swing tube up and set on infeed housing as shown. Be sure to align the knuckle assembly in the swing
tube with the lower gearbox in the infeed housing. Lower the other end of the swing tube onto the ground.
Step 48
Locate the 4 swing tube hold down plates & the 8 hold down spacers. Install the hold down plates & spaces
using (8) 3/8" x 1-1/2" flange bolts & flange nuts. Tighten all 8 fasteners.
Harvest International H13XX Assembly Manual
Fig. 47.1
Fig. 48.1
Page 32 of 35