Step 30 - HARVEST H1362 Assembly Manual

Step 29
Attach the carriage arms to the axle as shown in fig. 29.1. Fasten the carriage arms to the axle using
(4) 5/8" x 1-1/2" flange bolts and nuts. Do not tighten these bolts at this time.

Step 30

Locate the cylinder cross tube assembly. Place on the ground between the 2 carriage arms. Place
approximately two thirds of the way down the carriage arms from the axle as shown in fig. 30.1. Be sure to
place cylinder cross tube with the holes for the cylinder in the direction of the axle.
Harvest International H13XX Assembly Manual
Fig. 29.1
Fig. 30.1
Page 22 of 35