Table of Contents
Advertisement
Step 16
Next slide the chain guard over the PTO shaft and secure to the infeed housing (4) 3/8" x 3/4" flange bolts.
Then place lower "U" shaped guard place onto guard and secure with (4) 3/8" x 3/4" flange bolts.
Step 17
Locate the PTO support bracket & mount it to the infeed housing as shown in fig. 17.1 using (4) 3/8" x 3/4"
flange bolts & flange nuts. Attach the PTO support chain to the bracket as shown using a 3/8" x 1" flange bolt
& flange nut.
Harvest International H13XX Assembly Manual
Fig. 16.1
Fig. 17.1
Page 12 of 35
Advertisement
Table of Contents
