Step 20
Next mount the left hand winch bracket (10131B) to the left side of the infeed housing. Attatch the bracket
using (4) 3/8" x 1" flange bolts & flange nuts.
Fig. 20.1
Step 21
(Transport Arm Assembly)
st
Next, place the 2 hopper transport arm mount brackets on the 1
tube & secure with a total of (6) 3/8" x 1" hex
bolts & nuts. Next, place the assembled transport arm between the tube brackets & sure with a 3/4" x 3-1/2"
clevis pin & hair pin.
Fig. 21.1
Fig. 21.2
Harvest International H13XX Assembly Manual
Page 15 of 35