HARVEST H1362 Assembly Manual page 18

Step 24
Locate the longer cables. (41' on a H1362 & H1372; 61' on a H1382) Attach cable to eyebolts on the left &
st
right side of the 1 tube. Attach using the same process specified in step 23. Pull cable past the first truss
nd rd
keeping the cable on the outside of the truss. Put the cable through the cable clamps located on the 2 & 3
truss. When the cable is through both cable clamps, continue pulling the cable to the quick link located on the
rd th
joint on the end of the 3 tube (4 tube on a H1382). Secure using (2) 1/2" cable clamps as shown if fig. 24.3.
Repeat on opposite side of the auger. On an H1362 & H1382 this will be the discharge head joint.
Fig. 24.1 Fig. 24.2
Fig. 24.3
Harvest International H13XX Assembly Manual Page 18 of 35