Table of Contents
Advertisement
Step 45
Locate the brass breathers. Install both brass breather on the lower or rod end of the cylinders. Once the brass
breathers are installed tighten breather.
Fig. 45.1
Step 46
(Swing Tube & Hopper Installation)
Locate the swing hopper swivel ring (30407A). Install the swing hopper swivel ring on the discharge head of
the swing tube. Fasten the ring as shown in fig. 46.1 using (2) 1/2" x 5/8" shoulder bolt & 1/2" top lock nuts.
Fig. 46.1
Harvest International H13XX Assembly Manual
Page 31 of 35
Advertisement
Table of Contents
