Table of Contents
Advertisement
Step 51
Next, install the swing hopper onto the swing tube. Slide the hopper transition onto the swing tube while
inserting the square shaft of the upper transition flighting into the square tube on the lower transition flighting.
Align the holes in the hopper and swing tube with a punch. With the access door open secure the hopper to the
swing tube using (2) 5/8" x 1-1/2" flange bolts, (4) 5/8" washers, & (2) 5/8" top lock nuts. The washer will go
between the bolt and the hopper & the nut and swing tube respectively.
Fig. 51.1
Step 52
Next, install the manual canister. Mount the manual canister approximately 2 feet down the carriage arms
below the carriage are spacer bracket. Secure to the tube using (2) #12 x 3/4" self tapping screws. Note that
they canister lid will have to be removed to install 1 of the screws. After installation, reattach the canister lid.
Fig. 52.1
Harvest International H13XX Assembly Manual
Page 34 of 35
Advertisement
Table of Contents
