Step 43
Now, go through the carriage and insert 1/4" grease zerks into all bushing. (See pictures below)
Fig. 43.1
Fig. 43.2
Fig. 43.3
Step 44
(Hydraulic Hose Assembly)
First remove the plug from the top or the bore end of the cylinders. Identify the velocity fuse. Install velocity
fuse into both cylinder as shown in fig. 43.1. Next, install the "T" fitting on one cylinder and the 90 degree
elbow on the other. Connect the two fittings together with the short hydraulic hose. Next, connect the long
hose end to the other end of the "T" fitting. The cylinders should be assembled as shown in Fig. 43.2.
Fig. 44.1
Fig. 44.2
Harvest International H13XX Assembly Manual
Page 30 of 35