Step 2; Step 3 - HARVEST H13112 Assembly Manual

Step 2

1) After this section of flighting is tightened slide the two tubes together and align the holes, as in figure 2.1, a
long tapered punch works best.
FIG 2- 1
FIG 2- 2

Step 3

1) Then you install a total of (10)
3.1, the use of a long tapered punch works to align bolt holes best.
2) At tube #4 on the top side you will want to install the top and bottom (2) (4 total)
bracket,
Alignment of
tubes
thread bolts and
uts
flanged Nuts, as in figure
he quick link chain truss cable
Page 13 of 68