Advertisement
Cable Cubby F55 Edge • Installation Guide (Continued)
Attaching an Optional PMK 155 Mounting Kit
Follow these steps to attach a PMK 155 Mounting Kit to the Cable Cubby F55 Edge.
The Cable Cubby F55 Edge is delivered with an accessory mounting bracket attached. Detach this bracket by removing its
1.
two mounting screws (see figure 8). Set the bracket and screws aside. You will reattach them in
Removing the Accessory Mounting Bracket from the Cable Cubby F55 Edge
Figure 8.
Attach the PMK 155 to the accessory bracket using the two screws and washers from the PMK kit (see figure 9).
2.
Attaching the PMK 155 to the Accessory Bracket
Figure 9.
Accessory Bracket
step
3.
7
Advertisement
