Extron electronics Cable Cubby F55 Edge Installation Manual page 6

Cable Cubby F55 Edge • Installation Guide (Continued)
Attaching an Optional ZipClip Mounting Device to the Cable Cubby F55 Edge
The ZipClip 100, 200, or 400 can be attached to the Cable Cubby F55 Edge in order to mount a power supply or other device to
the Cable Cubby. Determine which ZipClip to use (depending on the device being attached) and in which orientation (vertical or
horizontal). Note that the ZipClip 400 can be mounted horizontally only. Plan and ensure that there is ample space for the device
and its cables.
ZipClip 100 — Vertical Mounting ZipClip 100 — Horizontal Mounting
ZipClip 200 — Vertical Mounting ZipClip 200 — Horizontal Mounting
ZipClip 400 — Horizontal Mounting
Mounting ZipClips
Figure 7.
6