Extron electronics Cable Cubby F55 Edge Installation Manual page 8

Cable Cubby F55 Edge • Installation Guide (Continued)
Attach the accessory bracket and PMK 155 to the Cable Cubby F55 Edge, using the two screws removed in
3.
Attaching the PMK 155 and Accessory Bracket to the Cable Cubby F55 Edge
Figure 10.
Mounting the Cable Cubby F55 Edge to a Table
Mount the Cable Cubby F55 Edge on the edge of the table as shown below.
1
Hold the assembled
Cable Cubby F55 Edge
enclosure onto the edge
of the table.
Mounting the Cable Cubby F55 Edge to a Table
Figure 11.
8
2
Under the table, turn both thumbscrew clamps
and tighten them snugly to secure the enclosure.
Ensure the Cable Cubby F55 Edge is firmly secured
to the furniture.
step 1
.