Intended Use For The Display Unit; Description; Operation; Function Of The Keys And Leds On The Keypad - Honeywell MSR PolyGard 2 MGC2-K User Manual

User Manual - PolyGard
Multi-Gas-Controller MGC2-K Honeywell
Display Unit for Series MGC2-K

5 Intended Use for the Display Unit

The display is used as visual indication, operating, commissioning and calibration unit for gas detecting and
measuring instruments of the series PolyGard

6 Description

The parameters, gas types, units, etc. specified in the description are only examples.

7 Operation

The complete configuration and service are made via operating keys in combination with the LCD display
screen. Security is provided via four password levels against unauthorized intervention
Version for PG2 series
Operation via 6 buttons

7.1 Function of the Keys and LEDs on the Keypad

The status LEDs indicate the operating state.
Green: Continuous:
Flashing:
Yellow: Continuous:
Slowly flashing:
Fast flashing:
Red:
The backlight of the display changes from green to red when an alarm is active.
®
PolyGard is a registered trademark of MSR
Phone 0049(0)8531/9004-0 Fax: 0049(0)8531/9004-54
MSR-Electronic GmbH, Bgm.-Schoenbauer-Str. 13, D 94060 Pocking www:msr-electronic.de Made in Germany
®
2
®
2 (PG2).
Exits programming, returns to the previous menu level.
Enters sub menus, saves parameter settings.
Scrolls up & down within a menu, changes a value.
Changes cursor position.
= Normal operation
= Maintenance message
= Failure
= Warming-up
= Special mode
=Alarm
Page
8
GAMGC2-K_E_0320
Specification subject to change without notice