ZigBee
This option enables wireless connection to one or several Smart Energy products, which
automatically divert PV energy to home appliances.
The Smart Energy ZigBee connections require a ZigBee plug-in and an external antenna,
available from SolarEdge.
The ZigBee Plug-in for Smart Energy is provided with an installation
guide, which should be reviewed prior to connection. Refer to
https://www.solaredge.com/sites/default/files/se-zigbee-plug-in-for-
setapp-installation-guide.pdf
The Smart Energy products are provided with an installation guide, which
should be reviewed prior to connection. Refer to
https://www.solaredge.com/products/device-control#/.
Communication Connectors
Opening for cable size (diameter)
4.5 - 7 mm, with cut
2 - 4 mm, with cut
The communication board has the following connectors:
Standard RJ45 terminal block for Ethernet connection
USB
RS485 connector
The SolarEdge Wi-Fi antenna, ZigBee or Cellular Plug-ins can be connected to the
communication board for optional wireless connection.
SolarEdge Home Hub Inverter Single Phase MAN-01-00812-1.5
Chapter 7: Setting Up Communication with the Monitoring
2.5 - 5 mm
Connection type
RS485
Ethernet (CAT6)
Antenna cable for wireless
communication
Platform 55