SolarEdge Energy Bank Installation Manual page 55

54 Communication Options
Wi-Fi
This communication option enables using a Wi-Fi connection for connecting to the
monitoring platform.
The Wi-Fi access point is built into the inverter. An antenna is required and available
from SolarEdge for connection to the monitoring platform.
Wireless Gateway, Wireless Repeater(s)
The Wireless Gateway collects inverter data using a dedicated Wi-Fi
connection and connects to the monitoring platform with the help of a
home router. Wireless Repeater(s) extend the Wi-Fi signal range between
the Wireless Gateway and inverter. Wireless Gateway and
Wireless Repeaters can be purchased separately from SolarEdge. For
more information, refer to https://www.solaredge.com/sites/default/files/se-wireless-
gateway-wireless-repeater-installation-guide.pdf.
Cellular
This wireless communication option enables using a cellular connection to connect one
or several devices (depending on the data plan used) to the monitoring platform.
The Cellular Plug-in is provided with a user manual, which should be
reviewed prior to connection. Refer to
https://www.solaredge.com/sites/default/files/se-cellular-plug-in-for-
inverters-with-setapp-installation-guide.pdf
SolarEdge Home Network
SolarEdge Home Hub Inverter comes with a pre-installed SolarEdge Home Network
communication board and antenna. This wireless communication option enables
connecting one or more SolarEdge Home Network enabled devices to inverter with an
installed SolarEdge Home Network plug-in.
The SolarEdge Home Network plug-in is provided with a user manual which should be
reviewed prior to connection. Refer to:
https://www.solaredge.com/sites/default/files/se-energy-net-plug-in-installation-
guide.pdf
SolarEdge Home Hub Inverter Single Phase MAN-01-00812-1.5