Table of Contents
Advertisement
CAUTION!
SolarEdge inverters and Power Optimisers can be installed at a minimum
distance of 50 m from the shoreline of an ocean or other saline environment, as
long as there are no direct salt water splashes on the inverter or Power
Optimiser.
For SolarEdge inverters installed at a distance of 200 m or closer to the
shoreline, special brackets must be purchased separately from SolarEdge and
SS304 stainless screws are required. For details, please contact your local sales
representative.
1. Determine the inverter mounting location, on a wall, stud framing or pole. It is
recommended to mount the inverter in a location protected from direct sunlight.
2. To allow proper heat dissipation, maintain the following minimum clearance areas
between the inverter and other objects:
If installing a single inverter:
20 cm from the top of the inverter.
At least 10 cm from the bottom of the inverter.
10 cm from the right and left of the inverter.
SolarEdge Home Hub Inverter Single Phase MAN-01-00812-1.5
Figure 6: Clearance areas
Chapter 3: Installing the
Inverter 27
Advertisement
Table of Contents
Troubleshooting
