SolarEdge Energy Bank Installation Manual page 25

24 Inverter Interfaces
LEDs: three LEDs indicate, by color and state (on/ off/ blinking
(2)
flickering /alternating
performance indications. For more information, refer to
https://www.solaredge.com/leds.
The main LED indications are:
Blue ON - the inverter is communicating with the monitoring
platform
Green ON - the system is producing
Green blinking - AC is connected but the system is not producing
Red ON - system error
The following table describes system performance information by LED color and
ON/OFF/P switch position.
(1)
Blinking = Turns ON and OFF for the same duration
(2)
Flickering = Turns ON for 100 mS and turns OFF for 5 seconds
(3)
Alternating = alternate LED flashes
(3)
), different system information, such as errors or
Figure 4: LEDs
SolarEdge Home Hub Inverter Single Phase MAN-01-00812-1.5
(1)
/