Art DTRACK3 User Manual page 97

When the checkbox
with DHCP support. The controller then works as a DHCP client. The corresponding
IP address, subnet mask
controller by the DHCP server are shown for your information. The MAC address of the
controller is printed in the field
If the network cable is unplugged or the DHCP support is unavail-
able while booting the controller uses its default IP address (i.e.
192.168.0.1).
Static IP Address By unticking the checkbox
address, subnet mask
gateway and nameserver
the controller for the changes to take effect.
Please avoid IP addresses 172.28.X.X and IP addresses in the range
from 172.29.0.1 to 172.29.0.20, as they are used for internal communi-
cation!
Please note that these settings are not part of your personal configura-
tion. Changes in this menu will affect all users of your controller! Your
controller may become unreachable with wrong IP settings! Refer to
chapter 5.3 on page 36.
Figure 8.22: Network Settings
DHCP client is ticked the controller may be connected to a LAN
, gateway and nameserver
ethernet-MAC
by entering the settings in the appropriate fields. Optionally, enter
. Accept the changes pressing
which have been assigned to the
LAN.
DHCP client you may specify a static
OK and exit the dialog. Reboot
8.7 Network
IP
97