Art DTRACK3 User Manual page 58

7 Menu DTRACK3 - Basic Configuration
password. Enter the password and press
page 58. The password protection feature is disabled and the previously set password is
deleted.
If the entered password is incorrect a corresponding message will appear. You may then
try again and enter the correct password.
Change the currently set password In the dialog enter your new password in the en-
try fields 'New password' and
message will appear next. If you are sure press
press Cancel to return to the dialog. In the last step you will be prompted to enter the
current password. Enter the password and press
7.2 on page 58. The password will be changed and the dialog is closed.
If the entered password is incorrect a corresponding message will appear. You may then
try again and enter the correct password.
In case you have lost the password, please refer to chapter 5.3.1 on
page 38 to reset the password feature.
58
Figure 7.1: Enable Access control
OK
Figure 7.2: Authorize Access control
'Repeat password' respectively, then press
once again. Please refer to figure 7.2 on
OK to change the password. Otherwise
OK once again. Please refer to figure
OK . A warning