Art DTRACK3 User Manual page 179

I'd like to calibrate a body but the body calibration dialogue is greyed out.
Please ensure that you have performed and accepted a valid room calibration prior to
body calibration. Check in the
calibration'.
What is the difference between
When selecting 'due to body
ment of the rigid body itself. When
system is set to the center of gravity of all markers building the rigid body.
Please refer to chapter 9.5.2 on page 122 for more information.
Do I have to move the target while performing a body calibration?
If possible we recommend to perform moderate movements because accuracy can be
improved doing so. However, the body has to be visible to the cameras all the time.
May I change the position and the orientation of the body coordinate system
later on?
Yes, you may use the dialogue
body coordinate system. Please refer to chapter 9.6 on page 130 for more information.
How do I define a name for a target?
Go to Tracking Body Administration
ter a name for the respective body. Please refer to chapter 9.4 on page 115 for more
information.
I cannot increase the number of targets anymore.
The maximum number of targets to be tracked (including
ing devices) depends on the license that is installed. Go to
which license you have.
Starting with DTRACK3
may activate and calibrate 4, 10, 30, 50 or up to 70 targets depending on the license
purchased.
Please refer to table 7.2 on page 60 for more information.
Event Display if there is a warning saying 'no valid room
'due to body' and
', the body coordinate system is determined by the arrange-
'due to room' is used the origin of the body coordinate
Body adjustment
(F8). Double-click into the name field and en-
version v3.0.0 a new license model has been established. You
'due to room'?
to alter position and orientation of the
Flystick2/2+/3 and
DTRACK3
13.7 Calibration
Fingertrack-
Licenses to see
179