Art DTRACK3 User Manual page 132

9 Menu Tracking - Tracking Configuration
Figure 9.29: Body Adjustment
To restore the default view press Reset view.
Press Enter or click OK to accept all changes for all bodies (i.e after confirmation the
changes are sent to the controller) and to close the dialog. Press Apply instead to change
the currently selected body only - the body will be redrawn and the dialog will be left open.
Press Undo to switch back to the unmodified state or Redo to repeat the last action. Dis-
card all changes by pressing Cancel.
Context Menu The visualisation can be changed by clicking the right mouse button
to open a context menu with the following options. (De-)select the appropriate ones by
(un-)ticking.
Live View Tick the use tracked orientation checkbox to switch to live mode. The 3D-
representation of the target in the 'Graphic view' will depict movements / rotation of the
target in the "real time"). This also enables the function Adjust axes to room (see table
9.12 on page 134 in order to align the body coordinate system collinear to the room
132