Art DTRACK3 User Manual page 155

By clicking on the tab
channel on the corresponding tab as described above. Scroll horizontally using the
right arrow button or simply resize the dialog window using the mouse. Click the button
Close tab to remove the selected output channel configuration. A warning message will
appear to confirm the action. Press
send data divisor In order to reduce the amount of data from the data stream you can
define a divisor from 1 to 10. The divisor works the following way:
1 .. every frame is transmitted,
2 .. every second frame is transmitted,
...
10 .. every tenth frame is transmitted.
selection of UDP output data
Identifier
fr
ts
6dcal
6d
3d
6df
6df2
6dmtr
gl
glcal
st
6di
6dmt
6dmt2
6dcov
3dcov
1
only available if activated in Tracking
old output
2
only available if activated in Tracking
checkbox
3
hidden, by default. An optional license code is necessary to unlock
these features. Please refer to section 7.2 on page 59 for more
information.
Please refer to the DTRACK3 Programmer's Guide
Ethernet for the format of the data output.
+ you can add one channel at a time up to 10 channels. Set-up each
Exit to close the
Description
frame counter
timestamp
number of calibrated bodies
6DOF standard body
3DOF marker
Flystick (old format)
Flystick
Measurement Tool reference
Fingertracking hand
number of calibrated Fingertracking hands
system status
6DOF inertial body (extended format)
Measurement Tool (old format)
Measurement Tool (also for ball probes)
6DOF standard body covariance
3DOF marker covariance
format'
'use old output format'
Table 9.16: Description of UDP output data
9.11 Output Settings
Output Settings
1
2
3
3
Flystick checkbox
Measurement Tool
Output of Measurement Data via
left /
dialog.
'use
155