Hygienic Reprocessing At Home; Cleaning - Pari eflow rapid Instructions For Use Manual

Hygienic reprocessing at
home

Cleaning

WARNING:
Clean the nebuliser handset (incl. aerosol
head) immediately after each application.
NOTE:
Rinsing all the parts of the nebuliser hand-
set and the aerosol head in warm tap
water straight after use prevents medica-
tion residue from accumulating, for exam-
ple. This helps you to prevent a potential
lengthening of the nebulisation times due
to partial closure of the pores in the
membrane.
NOTE:
If necessary, clean the aerosol head with
the easycare cleaning aid (not more than
twice a week). Backwashing unblocks the
pores in the membrane of the aerosol
head by flushing with liquid in the opposite
direction to the direction for nebulising.
Observe the information provided in the
easycare instructions for use.
• Rinse each side of the aerosol head for
approx. 5 seconds each in warm tap
water (water of drinking water quality,
temperature up to 37 °C).
• Rinse all parts of the nebuliser handset
for approx. 5 seconds.
• Place all nebuliser handset parts and
the aerosol head in warm tap water with
a few drops of washing-up liquid for
5 minutes. Use a clean bowl for this.
18
CAUTION:
Do not use a brushes or any other tools
to clean the aerosol head as they
may cause damage to the product
components.
• Rinse all nebuliser handset parts and
the front and back of the aerosol head
thoroughly under running tap water.
• Shake all parts to remove excess water
more quickly.
• Place the individual parts on a dry, clean
surface and allow them to air-dry
completely.
CAUTION:
Moisture promotes the growth of
bacteria. Please ensure adequate
drying after each cleaning.
®
eFlow rapid - 2022-07