Preparing The Nebuliser Handset - Pari eflow rapid Instructions For Use Manual

• Replace the country-specific adapters
for the power adapter as required. To
unlock, press the clip and push the
country-specific adapter upwards.
When plugging in, make sure that the
adapter (9a) engages in the power
adapter housing.
9a
• Connect the power adapter to the power
cord socket on the controller.
• Plug the power adapter into an electrical
wall socket.
®
eFlow rapid - 2022-07
Preparing the nebuliser
handset
CAUTION:
Check the parts of your nebuliser handset
before each use. Replace all broken,
deformed and heavily discoloured parts.
Damaged parts and incorrectly assem-
bled nebuliser handsets can impair the
function of the nebuliser handset and thus
also affect the treatment.
• Insert the aerosol head (4) into
the openings on the medication
reservoir (6) (opened aerosol
chamber (6a)).
It must snap noticeably into place.
CAUTION:
Do not touch the membrane (the curved
metal surface in the middle of the aerosol
head) to avoid damage.
60
6
6a
en
4
11