Table of Contents
Advertisement
4
CLEANING AND DISINFECTION AT HOME
Regularly clean all product components and the accessories
used, if they are visibly dirty immediately after use.
Disinfect all individual parts at least once a week, in the event
of an acute infection, once a day.
4.1 Preparation
• Take the metered dose inhaler out of the connecting ring on
the inhalation chamber and close it with the protective cap
provided for this purpose.
• Remove the tracheal adapter from the mouthpiece.
• Disconnect the mouthpiece from the inhalation chamber.
Info: The protective cap must be
open.
4.2 Cleaning
• Place all disassembled components in warm tap water with
a little dishwashing liquid for at least 5 min.
• Rinse all parts thoroughly in running water.
• You can remove excess water more quickly by shaking all
parts.
4.3 Disinfection
Once they have been cleaned, disinfect the VORTEX and
accessories as described in the following.
CAUTION
A damp environment may encourage the growth of bacteria.
Therefore, remove all parts from the pot or disinfector as
soon as disinfection has finished. Dry the parts. The risk of
infection is reduced when the parts are dried completely.
– 40 –
Advertisement
Chapters
Table of Contents
