Cleaning And Disinfection At Home - Pari 041G0500 Instructions For Use Manual

4 CLEANING AND DISINFECTION AT HOME

The PARI Filter/Valve Set must be cleaned after each use and
disinfected at least once a day.
4.1 Preparation
Dismantle the PARI Filter/Valve Set into its individual parts:
• Open the exhalation filter (bayonet closure).
• Take the filter pad out and dispose of it.
4.2 Cleaning
• Thoroughly clean all components (without the filter pad) in
warm tap water and dishwashing liquid for about 5 minutes. If
necessary, use a clean brush to remove loose dirt (the brush
must be reserved exclusively for this purpose).
• Rinse all parts thoroughly under warm running water.
• You can remove excess water more quickly by shaking all
parts.
4.3 Disinfection
Disinfect the disassembled PARI Filter/Valve Set (without the fil-
ter pad) immediately after cleaning (parts can only be disinfected
effectively if they have been cleaned first).
A damp environment may encourage the growth of bacteria ...
CAUTION
A damp environment may encourage the growth of bacteria.
Therefore, remove all parts from the pot or disinfector as soon as
disinfection has finished. Dry the parts. The risk of infection is
reduced when the parts are dried completely.
- 32 -