Pari eFlow rapid Manual

Modern nebuliser therapy
is twice as fast!
The eFlow ® rapid delivers approved
medications deep into the lungs rapidly
and highly efficientlyby inhalation. The
administered dose is comparable with that
of the PARI LC PLUS ® nebuliser. A soft aerosol cloud is
generated continuously and can be inhaled calmly.
When all the medication has been nebulised, the
device switches itself off automatically.
How does it work?
The heart of the patented technology is
a perforated steel membrane.
How is the aerosol generated?
The inhalation solution is forced
through the perforated steel membrane,
which is vibrating gently (117 kHz).
The advantages at a glance:
• Short treatment times for better quality of life
• Quiet running for discreet use
• Light, compact, portable, runs on mains power, or
batteries (rechargeable or standard) for greater mobility
• Aerosol properties scientifically optimised for
efficient treatment
• Easy to clean, can be disinfected and autoclaved for
absolute hygiene reliability
New package contents with effect from Jan. 1, 2008
Item No.: 078G1007; Control unit with
connection cord, international
power adapter with three
interchangeable adapters,
charger with rechargeable
batteries, 2 nebulisers (incl.
aerosol heads) easycare
cleaning tool for aerosol heads,
carrying case and nebuliser bag
Handling hints
A quick reference guide to familiarise you with the-
device. For more complete details, please read and
take note of the Instructions For Use.
Parts
Preassembled
nebuliser parts*
Membrane magnified approx. 100x
Mouthpiece
* The aerosol chamber and the medication reservoir are preassembled
Cross section of the membrane
and cannot be taken apart.
2 nebulisers with spare
aerosol heads
Control unit
Cap
Seal
Power button
Connection cord socket
Medication reservoir*
Aerosol head
Inspiratory valve
Aerosol chamber*
easycare cleaning tool for
aerosol heads
The easycare cleaning tool can help to cut nebulising
time in the event of reduced nebulising capacity.
Functional test
for the aerosol head
Measure the time taken to nebulise 2.5ml isotonic
saline solution (0.9%) without inhalation.:
1. If nebulising takes longer than 4
minutes, the aerosol head should
be cleaned with the easycare
cleaning tool.
2. If nebulising takes longer than
5 minutes, the aerosol head
should be replaced.
4 minutes
5 minutes