Performing Inhalation; Pausing During Inhalation - Pari eflow rapid Instructions For Use Manual

PERFORMING INHALATION

4
• Sit in an upright position and relax. This
makes inhalation easier and improves
uptake of the medication in the airways.
• Hold the nebuliser handset in your
hand.
CAUTION:
Hold the nebuliser handset horizontally
at all times while performing the inhala-
tion. If the handset is tilted, this may
result in the incorrect dosage being
delivered.
• Hold the mouthpiece between your
teeth and enclose with your lips. The
lips must not touch the blue expiratory
valve.
• Press the ON/OFF button on the
controller to start the inhalation session.
14
A green LED next to the ON/OFF button
lights up and an audible signal (1 beep) is
emitted to indicate readiness for use.
• Inhale and exhale slowly and deeply
through the mouthpiece. Hold the
mouthpiece in your mouth while
breathing out as well.
Do not breathe through your nose. You
can use a nose clip if necessary.
Info:
It is normal for aerosol to escape
through the expiratory valve in the
mouthpiece during exhalation; this
is not a malfunction.

Pausing during inhalation

If it is necessary to interrupt the inhalation
session briefly, activate pause mode:
• Press the ON/OFF button for approx.
1 second.
Pause mode is activated when the LED
flashes green.
• Press the ON/OFF button for approx.
1 second again to resume the inhalation
session.
Info:
Pause mode can only be activated
after an operating time of a few
seconds.
If pausing for a longer time, switch
the controller off by pressing the
ON/OFF button for approx. 2 seconds.
As long as there is enough liquid in the
medication reservoir, nebulisation can be
restarted by pressing the ON/OFF button
again.
®
eFlow rapid - 2022-07