Table of Contents
Advertisement
www.ti.com
3 INA260EVM-PDK (Rev A) Setup
Components of the INA260EVM-PDK are susceptible to damage by electrostatic discharge (ESD).
Customers are advised to observe proper ESD handling precautions when unpacking and handling
the EVM, including the use of a grounded wrist strap at an approved ESD workstation.
The INA260EVM-PDK (Rev A) hardware setup involves the following sequence of operations:
1. Perform a one-time GUI software installation
2. Configure the EVM jumpers
3. Connect the hardware
4. Power up the EVM and input source
SBOU180A – NOVEMBER 2016 – REVISED MARCH 2023
Submit Document Feedback
CAUTION
Copyright © 2023 Texas Instruments Incorporated
INA260EVM-PDK (Rev A) Setup
INA260EVM-PDK (Rev A)
11
Advertisement
Table of Contents
Need help?
Do you have a question about the INA260EVM-PDK and is the answer not in the manual?